Optimal packings of two to four equal circles on any flat torus

We find explicit formulas for the radii and locations of the circles in all the optimally dense packings of two, three or four equal circles on any flat torus, defined to be the quotient of the Euclidean plane by the lattice generated by two independent vectors. We prove the optimality of the arrangements using techniques from rigidity theory and topological graph theory.     

地磁对γγ方向角关联测量的影响

在γ-γ角关联实验中,发现能谱中全能峰的位置随探头方位角的改变而变化。本文通过不同的实验,验证了地磁对能谱测量的干扰以及对γ-γ方向角关联测量的影响。发现地磁对测量的影响主要来自光电倍增管,地磁方向与光电倍增管中电子飞行方向的夹角的改变,引起光电倍增管增益变化,最终给γ-γ方向角关联测量带来较大的影响。文中总结了如何减小地磁影响,改进γ-γ方向角关联实验测量的方法。     

Point‐to‐Plane Nonhomogeneous Electric‐Field‐Induced Simultaneous Formation of Giant Unilamellar Vesicles (GUVs) and Lipid Tubes

It is well‐known that homogeneous electric fields can be used to generate giant unilamellar vesicles (GUVs). Herein we report an interesting phenomenon of formation of GUVs and lipid tubes simultaneously using a nonhomogeneous electric field generated by point‐to‐plane electrodes. The underlying mechanism was analyzed using finite element analysis. The two forces play main roles, that is, the pulling force (F) to drag GUVs into lipid tubes induced by fluid flow, and the critical force (Fc) to prevent GUVs from deforming into lipid tubes induced by electric fields. In the center area underneath the needle electrode, the GUVs were found because F is less than Fc in that region, whereas in the edge area the lipid tubes were obtained because F is larger than Fc. The diffusion coefficient of lipid in the tubes was found to be 4.45 μm² s^?1 using a fluorescence recovery after photobleaching (FRAP) technique. The method demonstrated here is superior to conventional GUV or lipid tube fabrication methods, and has great potential in cell mimic or hollow material fabrication using GUVs and tubes as templates.     

低喷淋密度超亲水表面水平管降液膜温度分布

水平管降液膜蒸发广泛应用在石油、化工、海水淡化等领域,对低喷淋密度温度演化规律的研究有助于拓宽其应用范围,理解其微观机理。本文在超亲水表面上结合红外热追踪技术,对水平管降液膜表面的温度演化规律进行了研究,分析了温度分区现象和温升规律。实验中首次发现了马鞍形液膜内部的高温环状结构,并结合三维数值模拟揭示了掺混作用导致的局部高温环状结构形成的内部机理。     

The pyrolysis of propane

The pyrolysis of propane plays an important role in determining the combustion properties of natural gas mixtures and offers insight into the cracking patterns of larger fuels. This work investigates propane pyrolysis behind reflected shock waves with a multiwavelength laser-absorption speciation technique. Nine laser wavelengths, sensitive to key pyrolysis species, were used to measure absorbance time histories during the decomposition of 2% propane in argon between 1022 and 1467 K, 3.7-4.3 atm. Absorbance models were developed at each diagnostic wavelength to interrogate common initial conditions, and time histories of all major species are reported at 1250, 1290, 1330, 1370, and 1410 K. Nearly complete carbon recovery observed at lower temperatures enabled the inference of hydrogen formation from atomic conservation, while decaying carbon recovery at high temperatures suggests the formation of allene and 1-butene. The results show systematically faster pyrolysis than predicted by kinetic modeling and motivate further study into the kinetics of propane pyrolysis.     

Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

半导体电极的平带电位

平带电位(E_(fb))是半导体/电解质溶液体系的重要概念,是半导体电极在平带状态时的电极电位,它是半导体电极特有的可以实验测定的物理量。利用Mott-Schottky曲线以及光电化学等方法可以测定平带电位,判断半导体的类型以及估算半导体的载流子浓度,其数值可用于推测半导体的能级结构,确定半导体材料的价带或导带能级位置。这对于与太阳能开发利用相关的半导体光催化和光电化学研究都是非常重要的。本文分析了半导体电极的能带弯曲及影响因素,首次提出半导体界面层内费米能级弯曲,阐明半导体电极平带电位的物理意义及其测定方法,以帮助初学者理解和应用平带电位。     

大气声传播通道的声源当量估计方法

提出了一种基于大气声传播通道的爆炸声源能量估计方法,通过将计算大气声学的传播能量分布结果与大气中传播的声压幅度衰减模型相结合,使用平流层通道与热层通道传播损失能量比例作为修正量,提高了对爆炸声源能量的估计精度。在多次地面爆炸实验得到的数据中,使用观测距离800 km以上且同时存在平流层通道与热层通道的次声接收信号,对比了平流层顶风速修正的能量估计方法与该文提出的基于大气声传播通道的能量估计方法。实验结果验证了相对于传统风速修正的能量估计方法,该方法可显著降低估计误差。     

Radiative heat transfer augmentation of natural gas flames in radiant tube burners with porous ceramic inserts

Experiments were conducted using porous ceramic inserts to enhance the radiative heat transfer from natural gas flames in a straight-through radiant tube burner. The performance of the radiant tube burner with partially stabilized zirconia and silicon carbide inserts is compared to a baseline case of no inserts at three levels of combustion air preheat. Spectral intensities, temperatures within the radiant tube burner, tube wall temperatures, and exhaust temperatures were measured to determine the effectiveness of the enhanced heat transfer due to the inserts. Exhaust emission constituents were also measured to determine the effect that the inserts have on exhaust products. NO_x emissions are reduced by up to 30% with the inserts. The silicon carbide inserts have higher spectral intensities and total radiative energy transfer than partially stabilized zirconia inserts. Both inserts have enhanced radiant heat transfer compared to the no-insert configuration, with the radiative enhancement due to inserts as great as five times that of the no-insert configuration. The net result is increased tube wall temperatures and decreased exhaust temperatures with the ceramic inserts.